1
146

How to Clean a P-Trap?

Knowing how to clean a P-Trap is important because plumbing problems can occur easily and cost you a lot of money if left unsorted. Cleaning a P-Trap can be done individually, but it is strongly advisable to contact a plumbing company first so they can inspect the drain pipe and tell you how to proceed. It will save you time and effort as well as avoid unnecessary damage to your plumbing.

The Area Under The Sink Should Be Cleared

First, you should clear the entire area under your sink so that you can easily inspect and clean the plumbing. Do not forget to remove any linings to find out what is going on under there. Since plumbing pipes are usually tucked away, this may require some time before you can see them.

Inspect The P-Trap

The plumbing for the sink is connected to a P-trap, a U-shaped pipe, where most plumbing problems occur. The opening of the P-Trap leads into the sewer system, and if it gets clogged, water cannot drain out properly. If you turn on your sink faucet without first checking that it is unclogged, you can flood your entire kitchen floor!

Remove Clogs Using Vaseline & Plunge With Chemicals

When it comes to plumbing issues, plunging is an effective remedy. First off, you should clean the P-trap by applying some vaseline towards the opening of the plumbing pipe. The process will create a temporary but efficient seal that will prevent plumbing debris from passing through. Put on your rubber gloves, bring plumbing chemicals and prepare the plunger – also, the area around it should be cleared for this process to go smoothly.

Turn on The Faucet And Plunge Away

When you are ready with everything, turn on the sink’s faucet to drain out the plumbing. Plunge vigorously to remove any debris in the plumbing pipe and then turn off the water again. Clean up the vaseline that has been displaced, and then inspect your plumbing system carefully.

Place A Bucket to Collect Water Under the Pipes

If you think there is still something stuck in the plumbing pipe, place a bucket under it to catch any plumbing debris that may pass through. Repeat plunging until all plumbing problems are resolved.

Ensure to Remove the Coupling Nuts that are Attached to the Drain Pipe

Sometimes plumbing debris can even get stuck in the plumbing nuts attached to the drain pipe. Therefore, you will have to inspect these as well by removing their coupling nuts. By doing this, you are making sure that your plumbing is clean and ready for use.

These Pipes May Also Be Clogged If Disposed Of Properly

After removing all plumbing debris, the P-Trap will be able to flush properly again. If disposal of plumbing pipes is appropriately done, plumbing problems do not occur as frequently.

Plug the Pipe that Comes From the Wall

Plug the plumbing drain pipe coming from the wall, and make sure to check underneath your sink for plumbing leaks.

Ensure to Clean the Inside of the P-Trap

In order to clean the P-Trap, remove it from its plumbing and then use your plumbing chemicals or a plumbing snake to remove any plumbing debris that might be stuck inside. Make sure you inspect all plumbing nuts for damage before reinstalling the pipes back into their proper positions.

Reassemble the P-Trap

Once you are done cleaning the plumbing, reassemble the plumbing system again by clamping all plumbing nuts without overdoing it. Turn on the sink’s faucet to test your plumbing and ensure that everything is back to normal. If there is any plumbing debris left behind after you clean the P-Trap, turn off the plumbing and flush it down the drain with a plumbing snake. Plumbing paint may also come in use.

If you have a plumbing issue to deal with, check out this plumbing review website for reliable plumbing contractors. They can help you fix any plumbing problem!

Run Water Through to Verify if the P-Trap Leaks

After you reinstall plumbing, run the plumbing’s faucet to test if the plumbing is running correctly. If you see any leakage beneath or around your plumbing pipes, turn off the plumbing and make sure that everything is connected correctly before turning it on again.

Conclusively, cleaning a P-Trap is not as hard as it seems. By following the plumbing directions and plumbing tips mentioned above, you can easily clean your plumbing system without doing any further damage to it.

Show Comments

No Responses Yet

Leave a Reply